Hybrid seal/adhesive Soudal Fix All Turbo
More information
Overview
Description
High-quality, neutral, one-component permanently elastic construction adhesive based on SMX polymers with very quick adhesion.
Product advantages
- Very quick adhesion
- High final bond strength
- Very easy to work
- Permanently elastic after hardening
- Almost odourless
- Very good, mostly primer-free adhesion on almost all bases, even on damp bases
- Free of silicones, solvents, halogens, acids and isocyanates
- Paint compatible as per DIN 52452-A1 (see note) after skin formation
- Colourfast and weather- and UV-resistant
Tip
Apply the adhesive using a cartridge gun on one side as a section or in points (at least every 15 cm). When sticking panels place the points in the corners and on the edges. Put together immediately and press firmly or use a rubber hammer, for example. If necessary, support or clamp and fix. The adhesion will be firm after about 20 minutes and can bear a load after 3 hours. Processing temperature +0 °C (frost-free) to +40 °C (ambient temperature), +0 ºC to +35 ºC (adhesive surface temperature). Hardening is significantly delayed at low temperatures and/or low humidity! Clean with white spirit before hardening, can then be removed with silicone remover or mechanically. Smooth with Soudal smoother or a soap solution before skin formation. Possible to repair with Fix All Turbo.
Product group
Hybrid sealant/adhesive
Colour group
White
Colour designation by manufacturer
White
