Assembly Without Tools with the Lamello P-System
Advantages of the Lamello P-System Connecting Fittings
The connecting fittings of the P-System from our range offer a variety of distinctive features for processing. The assembly is easy, as the connectors do not need to be screwed in or glued, but only pushed into the pre-milled groove. The Lamello P‑System guarantees stable connections, without the need of screws or adhesive. The Lamello P-System guarantees stable connections, without the need of screws or adhesive. Due to an extensive, form-locking anchorage of the connectors in the groove, it is guaranteed that the components are strongly connected. Moreover, there is a certain lateral tolerance, which enables the carpenter/cabinet maker to position the workpieces ideally, so that they are perfectly flush. Despite the low milling depth of about 10 mm, the P-System connectors ensure a maximum tensile strength. Furthermore, the positioning pins prevent twisting. No further dowels are needed.
- Faster installation: sliding insertion instead of screwing or gluing
- Stable: form-locking anchorage across large surface areas
- Lateral tolerance: perfect, flush alignment of both workpieces
- Shallow depth: minimal cutting depth with maximum tensile strength
- No twisting: the positioning pins prevent twisting without additional dowels
Application of the P-System
To apply the P-System, a special groove with an undercut has to be milled. Depending on the desired functions, the relevant connectors can be inserted. The meshing undercut ensures a stable anchorage. For the preparation of the groove, a special biscuit cutter is inserted in maximum depth and afterwards slid sidewards. We recommend to use the Lamello profile groove cutter Zeta P2.
