English
Cleaners for the Edgebanding Machine
Do I really need different cleaners for different units on the edgebanding machine? Our experts are very knowledgeable in this area and they are in permanent exchange with the machine manufacturers. Here we have gathered all the important information for you:
Inside the machine, spray units with different release and cooling agents, lubricants and cleaners ensure smooth and safe operation while edgings are being processed. Little known fact: Our sustainable REDOCOL greenline Teclinex One For All can be used on all spray units of the formatting, glue and pressure, post-processing and finishing zones. This reduces storage cost and simplifies the work.
Teclinex: The One - For All
The transparent cleaner, which we developed ourselves, is based on organic alcohol. It makes it easier to handle the machine and ensures a high-quality finish when processing edgings.
- Reduction of storage costs
- Work and environmental protection due to plant-based sustainable raw materials
- Evaporates quickly and without leaving residues
Release Agent for the Formatting Zone
Before the jointing cutters, the release agent is sprayed along the edge of the board from above and below. It prevents hotmelt adhesive from sticking to the board surfaces. We have the following products available for this area of the machine:
- REDOCOL greenline Teclinex One For All
- FSG release agent TR 8 Plus
Cooling Agent for the Glue and Pressure Zone
Right after the pressure rollers, a cooling agent ensures that the still hot adhesive joint cools down as quickly as possible - a prerequisite for the radius to be milled off cleanly in the next step. You can use the following products from our range here:
- REDOCOL greenline Teclinex One For All
- FSG cooling agent KM 1 Plus
Lubricant for the Post-Processing Zone
To ensure that milling cutters and scraper blades work optimally in the post-processing zone, many machines have another spray point before the post-processing unit. You can fill the laboratory bottles with these products:
- REDOCOL greenline Teclinex One For All
- FSG release agent TR 12 Plus
Release and Cleaning Agent for the Finishing Zone
The edged board should leave the machine clean and without residues. A cleaning agent is therefore sprayed on before the buffing discs. We offer the following products for this purpose:
- REDOCOL greenline Teclinex One For All
- FSG plastic cleaner 925 Plus
Final Tip
If your machine has fewer spray units and you still want to protect pressure rollers and sensors from soiling with adhesive residue, we recommend the release spray Acmos 100-2450. With the handy spray can, you can access even hard-to-reach areas in the machine
