Sprayable contact adhesive REDOCOL Osterbond 570.52 Fine Fix
More information
Overview
Description
REDOCOL Osterbond Spray 570.52 Fine Fix is a sprayable contact adhesive with a very fine spray pattern for all laminates (HPL), wood veneer, high gloss foils and postforming elements. Thanks to the ultra fine mist, the adhesive is spread very evenly over the surface. Defects or adhesive build-up are prevented. Thin and demanding surfaces such as high gloss foils or laminates can be optionally bonded. Irregularities or an "orange peel" effect are prevented.
Product advantages
- Fine and thin adhesive application
- Low consumption
- Moisture-resistant
- High initial strength, fast drying
- Heat-resistant to + 115 °C
- Free of methylene chloride
Tip
Shake before use and leave valve open. Apply adhesive to both sides of the materials to be bonded. Allow to dry for 1-2 minutes, then join the components and press within 30 minutes at the latest. The optimum processing temperature is between 15 and 25 °C. For a good bond, we recommend that the workpieces are first acclimatised to room temperature after pressing.
Application
Apply on both sides
Base material
Styrene butadiene rubber (SBR)
Press time
Reduced time with high pressure
Select
Transparent
Select
22,1 l
Complete set
