Hybrid seal/adhesive Soudal Soudaseal 215LM, certified as per RAL and DIN
More information
Overview
Description
High-quality, plastic-elastic, one-component and soft-elastic sealing mass based on hybrid polymers for structural engineering expansion joints as per DIN 18540, as well as connection joints between window/door frames and brickwork. Tension-free bonding of window sealing tapes, tension compensating expansion joints between construction materials with very different expansion properties, joints with larger movement, e.g. connection joints in roofs and facades.
Product advantages
- Very easy to work with above 0 °C
- Permanently elastic after hardening
- Almost odourless
- Colourfast and weather- and UV-resistant
- Free of solvents, isocyanates and silicones
- Adheres with no primer even on damp bases
- Highly paint compatible as per DIN 52452
- Non-corrosive
- Hardens without bubbles
- Complies with DIN 18540 F
- RAL seal of quality for joint sealing components and systems
Tip
Worked with a manual spray gun or air pistol, processing temperature + 0 (frost-free) to + 40 °C (ambient temperature), or + 0 (frost-free) to + 35 ºC (adhesive surface temperature). Hardened through humidity at room temperature from outside to inside and slows over time. Hardening is significantly delayed at low temperatures and/or low humidity! Clean with white spirit before hardening, can then be removed with silicone remover or mechanically. Smooth with Soudal smoother or a soap solution before skin formation. Due to the high propensity of some natural stones to stain please do not use any other smoother in these cases (e.g. detergent). Immediately wash off or remove excessive smoother.
Product group
Hybrid-Dicht-/Klebstoffe
Building material class according to DIN 4102, Part 1
B2
Content
0,290 l
Select
≈ RAL 7036 platinum grey
RAL 8028 terra brown
RAL 9003 signal white
Select
Brown
Concrete grey
White
